Marmodom MARMOPLASTER PRO DECOR 1.5 WHITE 25 kg Water-repellent acrylic

Acrylic, water-repellent, coloured decorative plaster in paste form (White or coloured)

DECOR CHOCOMETERS: FINE (1,0 mm) / STANDARD (1,3 mm) GRAFIATO CHOCOMETERS: STANDARD (1,3 mm) 

MARMOPLASTER PRO is a white, colourable, pasty, acrylic plaster. Ready to use, available in Decor or Grafiato face. It is used as a final coating on substrates such as plasters, exposed concrete, plasterboards, cement board, etc. It is suitable for exterior and interior use.

• Characterized by high water repellency and resistance to weather changes.
• Ensures high bonding strength, high elasticity and eliminates the risk of cracking.
• Gives a coloured, high-strength final surface. No painting of the final surface is required.
• It is ideal for topcoating in exterior thermal insulation systems.
• Homogeneous, ready-to-use industrial product of consistently high quality.
• Characterized by increased application speed, is economical and provides excellent final results.

Recommendation & Characteristics:

Mixture of high elasticity acrylic emulsion and strictly selected particle size and quality of crushed marble, enriched with special improving additives.

Application:

• The substrate must be firmly dry and clean from all kinds of residues (plasters, powders, paints, oils, etc.).
• For best results, it is recommended, before applying MARMOPLASTER PRO, to prepare the substrate with BIOPRIMER PRO FINE primer in the same shade as the decorative plaster.
• The product is stirred very well and applied using a smooth metal spatula. The thickness of the application layer varies from 1.0 mm to 1.5 mm and depends on the granulometry of the product and the coarseness of the substrate.
• For optimum results, both the application of the plaster and the finishing of the plastered surfaces must be carried out without interruption and without wetting.
• Finishing is carried out with a hard plastic or metal sander or polystyrene sander.
• The Decor look is best achieved by making small continuous circular movements with the sander.The Grafiato look is best achieved by making large circular movements with the sander and then longitudinal movements in the desired direction.The exact application and finishing time depends on the substrate and environmental conditions.
• Before, during application and until the coating has cured, surfaces should be protected from exposure to climatic or environmental conditions (wind, rain, high temperatures, dust, etc.).
• The application temperature should be between + 5 °C and +35 °C.

Packaging & Storage:

• Ιn 25 kg containers
• 12 months from the date of production, in intact original packaging. Store in a shady, dry place, protected from moisture and frost.

Consumption:

From 1,5 kg/m2 to 2,2 kg/m2, depending on particle size, substrate type and required finish.