Marmodom PROTECTOR SHIELD GLOSS 1kg Two-component transparent polyurethane varnish (2-C)

Two-component clear polyurethane varnish (2-C)

PROTECTOR SHIELD gloss is a two-component acrylic/aliphatic polyurethane-based coating, used as a top coat (finish) in floor and wall applications (grouted cement mortars, concrete, industrial floors, stone, etc.), metal surface coatings and structures near marine areas. Suitable also for swimming pools as a protective coating over epoxy paint. It waterproofs the surface while giving it high mechanical strength - especially in abrasion and impact - and resistance to stains. Finally, it has excellent UV resistance and does not yellow. It polymerises with atmospheric, subsoil and air humidity and gives a glossy surface.
Homogeneous, ready-to-use, industrial product of consistently high quality. Ensures good workability, increased application speed, is economical and provides excellent results.

Recommendation & Characteristics:
Two-component (2-C) transparent polyurethane coating
Although the specifications and instructions set out in this bulletin have been compiled to the best of our skill, knowledge and experience, they should be taken as indicative results and require verification after many applications. Users to whom this product is addressed should verify its suitability for the intended application. The end user is responsible for any result of the use of the product.

Application:
- The substrate must be firmly dry and free from all types of residues (plasters, powders, paints, oils, etc.). Old coatings, dirt, grease, vegetable matter and dust must be removed with an abrasive machine (sander). Any surface irregularities shall be healed and sanded. Any loose pieces or dust from sanding shall be removed. Caution: do not wash the surface with water before application.
- In the case of fresh concrete, at least 28 days are required before application of the material.
- The moisture content of the substrate must not exceed 4%.
- PROTECTOR SHIELD gloss is ready for use after the two components have been mixed (for approximately 3 minutes) and allowed to settle for a further 5 minutes. It is applied by roller in two coats.
- The working time is approximately 2 hours (25 °C); - The time between two coats is 24 hours (25 °C).
- The hardening time is 24 hours (25 oC).
- For best results, the temperature at application should be between 5oC and 35oC. Low temperatures slow down curing, while high temperatures accelerate it. High humidity can affect the finish.
- Once the PROTECTOR SHIELD gloss container is opened and comes into contact with air and atmospheric moisture, its contents must be used in its entirety. In the event that any quantity remains in the container after application, it will harden over time and cannot be used.
- The application temperature should be between +12 oC and +35 oC.

Packaging & Storage:
- In sets of metal containers of 5 kg (A+ B component) and 1 kg (A+ B component).
- In sealed containers and in a dry environment, protected from frost and prolonged exposure to strong sunlight for 2 years (Ingredient A) and 12 months (Ingredient B) from the date of production.

Consumption:
100 - 200 gr/m2, depending on the type of substrate.