Plastomeric Waterproofing Bitumen Membrane Rock Plast White Slates 4.5kg/m2 1mx10m

Rock Plast is a Plastomeric high performance, prefabricated, modified bitumen waterproof- ing membrane consisting of proprietary water- proofing bitumen compound, reinforced with Non-Woven Polyester Carrier. 

Rock Plast proprietary waterproofing com- pound is formulated with high grade bitumen modified with Atactic polypropylene (APP) to increase elasticity, flexibility, and enhanced with admixture of Thermoplastic materials to gain high heat resistance, good elongation and low temperature flexibility. 

To improve the UV resist ance and durability for The Product, the membrane is coated with Mineral Stabilizers. 

Application 

Rock Plast waterproofing membrane are used for a wide variety of application: 

• Roofing or Re-roofing for covered single layer system or as a base layer for multi-layer systems. 
• Wet area, Swimming Pool and Toilets. - Underground waterproofing
  - Flat and Sloped roofing 
• The Product could be applied for waterproofing of foundations and engineering structures by torcing, hot air generator or by using special adhesives in both cold and hot applications. 
• Cleaning the substrate surface is a must, till
  it be comes dry, smooth, and remove any particles. - Based on surface conditions, a coat of ROCKAL primer product will be required prior to the appli cation of the membrane.
• According to the waterproofing system design and adhesion instruction, APP-Product can be applied to the substrate fully bonded, semi bonded or loose laid.
• Overlapping is essential as follow, side laps from 8-10 cm and end laps from 12-15 cm.
• Please refer to the ROCKAL applicator guide for complete instruction on the application of the product 

Key Features 

• High U.V. resistance (Mineral Finish). • Excellent thermal resistance
• Strong adhesion to substrate
• Proven water impermeability 

• Chemical resistance to wide range of light acidic, alkaline solutions and bacteria. 

Transportation & Storage 

- Rolls must be in an upright position on a pallet in a One-row height. 

- Avoid falls or other mechanical impacts during loading and unloading of rolls. 

- Storage of rolls in a horizontal position is prohibited.
- Protect the rolls from direct UV-rays, any source of heat and moisture.